View HCPL0730_4771991.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HCPL0700, HCPL0701, HCPL0730, HCPL0731 -- Low Input Current High Gain Split Darlington Optocouplers
April 2009
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Low Input Current High Gain Split Darlington Optocouplers
Single Channel: HCPL0700, HCPL0701, Dual Channel: HCPL0730, HCPL0731 Features
Low input current: 0.5mA Superior CTR: 2000% Superior CMR - 10 kV/s CTR guaranteed 0C to 70C U.L. Recognized (file# E90700) VDE 0884 recognized (file# 136616)
Description
The HCPL0700, HCPL0701, HCPL0730 and HCPL0731 optocouplers consist of an AlGaAs LED optically coupled to a high gain split darlington photodetector housed in a compact 8-pin small outline package. The HCPL0730 and HCPL0731 devices have two channels per package for optimum mounting density. The split darlington configuration separating the input photodiode and the first stage gain from the output transistor permits lower output saturation voltage and higher speed operation than possible with conventional darlington phototransistor optocoupler. The combination of a very low input current of 0.5mA and a high current transfer ratio of 2000% makes this family particularly useful for input interface to MOS, CMOS, LSTTL and EIA RS232C, while output compatibility is ensured to CMOS as well as high fan-out TTL requirements.
- approval pending for HCPL0730/0731 BSI recognized (file# 8661, 8662) - HCPL0700/0701 only
Applications
Digital logic ground isolation Telephone ring detector EIA-RS-232C line receiver High common mode noise line receiver P bus isolation Current loop receiver
Schematics
N/C 1
8 VCC
+1 V
F1
8 VCC
+2 V
F
7 VB
_2
7 V01
_
3
6 VO
_ V
3
6 V02
Truth Table
LED VO
LOW HIGH ON OFF
F2
N/C 4
5 GND
+4
5 GND
HCPL0700 / HCPL0701
HCPL0730 / HCPL0731
(c)2003 Fairchild Semiconductor Corporation HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
HCPL0700, HCPL0701, HCPL0730, HCPL0731 -- Low Input Current High Gain Split Darlington Optocouplers
Absolute Maximum Ratings (TA = 25C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.
Symbol
TSTG TOPR EMITTER IF (avg) IF (pk) IF (trans) VR PD DETECTOR IO (avg) VEBR VCC, VO PD Storage Temperature
Parameter
Operating Temperature Reflow Temperature Profile (Refer to page 12) DC/Average Forward Input Current Peak Forward Input Current (50% duty cycle, 1 ms P.W.) Peak Transient Input Current - (1 s P.W., 300 pps) Reverse Input Voltage Input Power Dissipation Average Output Current (Pin 6) Emitter-Base Reverse Voltage Supply Voltage, Output Voltage Output power dissipation HCPL0700/HCPL0701 HCPL0700/HCPL0730 HCPL0701/HCPL0731
Value
-40 to +125 -40 to +85
Units
C C
20 40 1.0 5 35 60 0.5 -0.5 to 7 -0.5 to 18 100
mA mA A V mW mA V V mW
(c)2003 Fairchild Semiconductor Corporation HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com 2
HCPL0700, HCPL0701, HCPL0730, HCPL0731 -- Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics (TA = 0 to 70C unless otherwise specified)
Individual Component Characteristics Symbol
EMITTER VF Input Forward Voltage IF = 1.6mA TA = 25C HCPL0700/01 HCPL0730/31 All BVR Input Reverse TA =25C, IR = 10A Breakdown Voltage Logic High Output Current Logic Low Supply Current IF = 0mA, VO = VCC = 18V IF = 0mA, VO = VCC = 7V IF = 1.6mA, VO = Open, VCC = 18V IF1 = IF2 = 1.6mA, VCC = 7V VO1 = VO2 = Open, VCC = 18V ICCH Logic High Supply Current IF = 0mA, VO = Open, VCC = 18V IF1 = IF2 = 0, VCC = 7V VO1 = VO2 = Open, VCC = 18V All 5.0 1.0 1.25 1.35 1.75 1.7 V
Parameter
Test Conditions
Device
Min. Typ.* Max
Unit
DETECTOR IOH ICCL HCPL0701/31 HCPL0700/30 HCPL0700/01 HCPL0730 HCPL0731 HCPL0700/01 HCPL0730 HCPL0731 0.001 0.01 0.01 0.01 0.4 0.8 1 10 20 A 100 250 1.5 3 mA A
Transfer Characteristics Symbol
CTR
Parameter
COUPLED Current Transfer Ratio (Note 1, 2)
Test Conditions
IF = 0.5mA, VO = 0.4 V, VCC = 4.5V IF = 1.6mA, VO = 0.4 V, VCC = 4.5V
Device
HCPL0701/31 HCPL0700 HCPL0701 HCPL0730 HCPL0731 HCPL0701 HCPL0731
Min. Typ.* Max. Unit
400 300 500 300 500 5000 2600 2600 5000 5000 0.4 0.4 0.4 0.4 V %
VOL
Logic Low Output Voltage
IF = 0.5mA, IO = 2mA, VCC = 4.5V IF = 1.6mA, IO = 8mA, VCC = 4.5V IF = 5mA, IO = 15mA, VCC = 4.5V IF = 12mA, IO = 24mA, VCC = 4.5V IF = 1.6mA, IO = 4.8mA, VCC = 4.5V
HCPL0700/0730
0.4
Isolation Characteristics Symbol
II-O
Characteristics
Input-Output Insulation Leakage Current Withstand Insulation Test Voltage Resistance (Input to Output)
Test Conditions
Relative humidity = 45%, TA = 25C, t = 5 s, VI-O = 3000 VDC (Note 4) RH 50%, TA = 25C, II-O 2A, t = 1 min. (Note 4, 5) VI-O = 500 VDC (Note 4)
Min.
Typ.*
Max.
1.0
Unit
A
VISO
2500
VRMS
RI-O
1012
*All typicals at TA = 25C
(c)2003 Fairchild Semiconductor Corporation HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com 3
HCPL0700, HCPL0701, HCPL0730, HCPL0731 -- Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics (TA = 0 to 70C unless otherwise specified)
Switching Characteristics (VCC = 5V) Symbol
TPHL
Parameter
Propagation Delay Time to Logic Low (Note 2) (Fig. 14)
Test Conditions
RL = 4.7k, IF = 0.5mA TA = 25C RL = 270 , IF = 12mA TA = 25C RL = 2.2 k, IF = 1.6mA TA = 25C
Device
HCPL0701 HCPL0731 HCPL0701 HCPL0731 HCPL0701 HCPL0731 HCPL0701 HCPL0731 HCPL0700 HCPL0730/0731 HCPL0700 HCPL0730/0731 HCPL0701/31 HCPL0701/31 HCPL0701 HCPL0731 HCPL0701 HCPL0731 HCPL0700/30/31 HCPL0700/30/31 ALL
Min.
Typ.*
Max.
30 120
Unit
s
3 5
25 100 2 3
0.3 0.4
1 2 15 25
1 2 12
10 20 90 60 10 15 s
TPLH
Propagation Delay Time to Logic High (Note 2) (Fig. 14)
RL = 4.7 k, IF = 0.5mA TA = 25C RL = 270 , IF = 12mA TA = 25C RL = 2.2 k, IF = 1.6mA TA = 25C
1.6 1.6 7 1,000 10,000
7 10 50 35 V/s
|CMH|
Common Mode Transient Immunity at Logic High Common Mode Transient Immunity at Logic Low
IF = 0mA, |VCM| = 10 VP-P , TA = 25C, RL = 2.2k (Note 3) (Fig. 15) IF = 1.6mA, |VCM| = 10 VP-P , TA = 25C, RL = 2.2 k (Note 3) (Fig. 15)
|CML|
ALL
1,000
10,000
V/s
*All typicals at TA = 25C Notes: 1. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. 2. Pin 7 open. Use of a resistor between pins 5 and 7 will decrease gain and delay time. 3. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVCM/dt on the leading edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVCM/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8 V). 4. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 5. 2500 VAC RMS for 1 minute duration is equivalent to 3000 VAC RMS for 1 second duration.
(c)2003 Fairchild Semiconductor Corporation HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com 4
HCPL0700, HCPL0701, HCPL0730, HCPL0731 -- Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves
35 30
Fig. 1 Propagation Delay vs. Temperature (HCPL0700, HCPL0701)
20 VCC = 5 V IF = 0.5 mA RL = 4.7 k 1/f = 50 s 18
Fig. 2 Propagation Delay vs. Temperature (HCPL0700, HCPL0701)
IF = 1.6 mA VCC = 5 V RL = 2.2 k 1/f = 50 s
tp - PROPAGATION DELAY (s)
tp - PROPAGATION DELAY (s)
tPLH
tPLH
16 14 12 10 8 6 4
25
20
15
10
5 tPHL 0 -60 -40 -20 0 20 40 60 80 100 2 0 -60 -40 -20 0 20 40 60 80
tPHL
100
TA - TEMPERATURE (C)
TA - TEMPERATURE (C)
Fig. 3 Propagation Delay vs. Temperature (HCPL0700, HCPL0701)
IF = 12 mA VCC = 5 V RL = 270 1/f = 50 s 3
Fig. 4 Logic High Output Current vs. Temperature (HCPL0700, HCPL0701)
IOH - LOGIC HIGH OUTPUT CURRENT (nA)
1000 VCC = VO = 5.5 V
4
tp - PROPAGATION DELAY (s)
tPLH
100
10
2
1
1 tPHL 0 -60 -40 -20 0 20 40 60 80 100
0.1
0.01 -40 -20 0 20 40 60 80 100
TA - TEMPERATURE (C)
TA - TEMPERATURE (C)
Fig. 5 Propagation Delay vs. Input Forward Currrent (HCPL0730, HCPL0731)
20
TA = 25 VCC = 5V
Fig. 6 Output Current vs. Input Forward Current (HCPL0700, HCPL0701)
100
tp - PROPAGATION DELAY (s)
16
t PLH R L = 4.7k
IO - OUTPUT CURRENT (mA)
10
TA = 85C
12
tPLH
1 TA = 70C TA = 25C 0.1 TA = 0C TA = -40C 0.01 0.01 VCC = 5V VO = 0.4V 10
8
R L = 2.2k
4
t PHL R L = 2.2k or 4.7k
0 0 1 2 3 4 5 6 7 8 9 10
0.1
1
TA - TEMPERATURE (C)
IF - INPUT FORWARD CURRENT (mA)
(c)2003 Fairchild Semiconductor Corporation HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com 5
HCPL0700, HCPL0701, HCPL0730, HCPL0731 -- Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves (Continued)
Fig. 7 Input Forward Current vs. Forward Voltage (HCPL0700, HCPL0701)
100 100
Fig. 8 Input Forward Current vs. Forward Voltage (HCPL0730, HCPL0731)
IF - FORWARD CURRENT (mA)
10 TA = 70C
IF - FORWARD CURRENT (mA)
TA = 85C
10
TA = 85C TA = 70C TA = -40C
1
1
TA = 25C TA = 0C
0.1 TA = 25C 0.01 TA = 0C TA = -40C 0.001 1.1 1.2 1.3 1.4 1.5 1.6
0.1
0.01
0.001 0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
VF - FORWARD VOLTAGE (V)
VF - FORWARD VOLTAGE (V)
Fig. 9 Logic Low Supply Current vs. Input Forward Current (HCPL0700, HCPL0701)
ICC (PER CHANNEL) - SUPPLY CURRENT (mA) ICCL - LOGIC LOW SUPPLY CURRENT (mA)
0.5 Logic Low Supply Current vs. Input Forward Current 0.4 VCC = 18V 10
Fig. 10 Supply Current vs. Input Forward Current (HCPL0730, HCPL0731)
TA = 25C
VCC = 18V 1.0 VCC = 7V
0.3 VCC = 5V 0.2
0.1
0.1
0.0 0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0.01 0.1
1
10
IF - INPUT FORWARD CURRENT (mA)
IF - INPUT FORWARD CURRENT (mA)
Fig. 11 DC Transfer Characteristics (HCPL0700, HCPL0701)
80 IF = 5.0mA IF = 4.5mA IF = 4.0mA IF = 3.5mA IF = 3.0mA IF = 2.5mA VCC= 5V TA = 25C IF = 2.0mA IF = 1.5mA IF = 1.0mA IF = 0.5mA 140
TA = 25C V CC = 5V
Fig. 12 DC Transfer Characteristics (HCPL0730, HCPL0731)
I F = 5mA I F = 4.5mA
120
IO - OUTPUT CURRENT (mA)
60
IO - OUTPUT CURRENT (mA)
100
4mA 3.5mA 3mA
80
40
60
2.5mA 2mA
40
20
1.5mA 1mA
20
0.5mA
0 0 1 2
0 0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
VO - OUTPUT VOLTAGE (V)
VO - OUTPUT VOLTAGE (V)
(c)2003 Fairchild Semiconductor Corporation HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com 6
HCPL0700, HCPL0701, HCPL0730, HCPL0731 -- Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves (Continued)
Fig. 13 Current Transfer Ratio vs. Input Forward Current (HCPL0700, HCPL0701)
3500
CTR - CURRENT TRANSFER RATIO (%)
3000
TA = 85C
VCC = 5V VO = 0.4V
2500
TA = 70C TA = 25C
2000
1500
TA = 0C
1000 TA = -40C 500
0 0.1
1
10
IF - INPUT FORWARD CURRENT (mA)
(c)2003 Fairchild Semiconductor Corporation HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com 7
HCPL0700, HCPL0701, HCPL0730, HCPL0731 -- Low Input Current High Gain Split Darlington Optocouplers
Test Circuits
1
IF Noise Shield
Pulse Generator tr = 5ns Z O = 50 V I/ f< 100s
8 7 6 5
VCC C
+5 V
Pulse Generator tr = 5ns Z O = 50 V
IF
+
Noise Shield
1
VF1 -
8 7 6
VCC
L
+5 V 0.1 F VO C = 15 pF*
2
VF
VB
RL
10% DUTY CYCLE I/f < 100 S VO
2
-
V01
3
I F Monitor Rm
VO 0.1 F
V02
IF MONITOR Rm C L = 15 pF*
VF2 +
4
GND
4
5
GND
Test Circuit for HCPL-0700 and HCPL-0701 IF
Test Circuit for HCPL-0730 and HCPL-0731
VO
5V
1.5 V
1.5 V VOL O
TPHL
TPLH
Fig. 14 Switching Time Test Circuit T
IF Noise Shield Noise Shield
1 2
VF A B VFF
8 7 6 5
VCC C
+5 V IF
+ VF1 A
1 2 3 4
8 7 6 5
VCC RL V01 0.1 F
+5 V
VB
RL B VO 0.1 F VFF F
VO
3 4
+
VCM C
VO
VF2 +
V02
GND
-
GND
-
Pulse Gen
+
VCM -
Pulse Gen Test Circuit for HCPL-0700 and HCPL-0701 VCM 10 V C 10% tr Test Circuit for HCPL-0730 and HCPL-0731
90%
90% 10% tf
0V
VO Switch at A : I F = 0 mA VO Switch at B : I F = 1.6 mA
5V
VOL
Fig. 15 Common Mode Immunity Test Circuit T
(c)2003 Fairchild Semiconductor Corporation HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com 8
HCPL0700, HCPL0701, HCPL0730, HCPL0731 -- Low Input Current High Gain Split Darlington Optocouplers
Package Dimensions
8-pin SOIC Surface Mount
8
0.164 (4.16) 0.144 (3.66)
1
SEATING PLANE
0.202 (5.13) 0.182 (4.63)
0.143 (3.63) 0.123 (3.13)
0.010 (0.25) 0.006 (0.16)
0.021 (0.53) 0.011 (0.28) 0.050 (1.27) Typ. Lead Coplanarity: 0.004 (0.10) MAX
0.008 (0.20) 0.003 (0.08)
0.244 (6.19) 0.224 (5.69)
Recommended Pad Layout
0.024 (0.61)
0.060 (1.52) 0.275 (6.99) 0.155 (3.94)
0.050 (1.27)
Dimensions in inches (mm).
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/
(c)2003 Fairchild Semiconductor Corporation HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com 9
HCPL0700, HCPL0701, HCPL0730, HCPL0731 -- Low Input Current High Gain Split Darlington Optocouplers
Ordering Information
Option
V R2 R2V
Part Number Example
HCPL0700V HCPL0700R2 HCPL0700R2V VDE 0884
Description
Tape and reel (2500 units per reel) VDE 0884, Tape and reel (2500 units per reel)
Marking Information
1
700 V X YY S
2
6
3
4
5
Definitions
1 2 3 4 5 6 Fairchild logo Device number VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) One digit year code, e.g., `3' Two digit work week ranging from `01' to `53' Assembly package code
(c)2003 Fairchild Semiconductor Corporation HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com 10
HCPL0700, HCPL0701, HCPL0730, HCPL0731 -- Low Input Current High Gain Split Darlington Optocouplers
Carrier Tape Specification
8.0 0.10 3.50 0.20 0.30 MAX 4.0 0.10 2.0 0.05 O1.5 MIN 1.75 0.10
5.5 0.05 8.3 0.10 5.20 0.20 12.0 0.3
0.1 MAX User Direction of Feed
Dimensions in mm
6.40 0.20
O1.5 0.1
(c)2003 Fairchild Semiconductor Corporation HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com 11
HCPL0700, HCPL0701, HCPL0730, HCPL0731 -- Low Input Current High Gain Split Darlington Optocouplers
Reflow Profile
260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 TP
Max. Ramp-up Rate = 3C/S Max. Ramp-down Rate = 6C/S
tP Tsmax Preheat Area Tsmin ts tL
Temperature (C)
120 Time 25C to Peak
240
360
Time (seconds)
Profile Freature
Temperature Min. (Tsmin) Temperature Max. (Tsmax) Time (tS) from (Tsmin to Tsmax) Ramp-up Rate (tL to tP) Liquidous Temperature (TL) Time (tL) Maintained Above (TL) Peak Body Package Temperature Time (tP) within 5C of 260C Ramp-down Rate (TP to TL) Time 25C to Peak Temperature
Pb-Free Assembly Profile
150C 200C 60-120 seconds 3C/second max. 217C 60-150 seconds 260C +0C / -5C 30 seconds 6C/second max. 8 minutes max.
(c)2003 Fairchild Semiconductor Corporation HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com 12
HCPL0700, HCPL0701, HCPL0730, HCPL0731 -- Low Input Current High Gain Split Darlington Optocouplers
TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. Auto-SPMTM Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EfficentMaxTM EZSWITCHTM* TM*
(R)
Fairchild Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) (R) FAST FastvCoreTM FETBenchTM FlashWriter(R)* FPSTM
(R)
F-PFSTM FRFET(R) SM Global Power Resource Green FPSTM Green FPSTM e-SeriesTM GmaxTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM MotionMaxTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R)
(R)
PowerTrench(R) PowerXSTM Programmable Active DroopTM QFET(R) QSTM Quiet SeriesTM RapidConfigureTM TM Saving our world, 1mW/W/kW at a timeTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SupreMOSTM SyncFETTM Sync-LockTM (R) *
The Power Franchise(R)
TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM TriFault DetectTM TRUECURRENTTM* SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM VisualMaxTM XSTM
PDP SPMTM Power-SPMTM
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Preliminary No Identification Needed Obsolete Product Status Formative / In Design First Production Full Production Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only.
Rev. I40
(c)2003 Fairchild Semiconductor Corporation HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com 13

▲Up To Search▲

Price & Availability of HCPL0730

	To Download HCPL0730 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .